3DSettings
← All settings Official Bambu
Bambu PLA Glow @BBL A1M
Bambu Lab A1 mini · PLA · Bambu Studio
Original profile: Bambu PLA Glow @BBL A1M · AGPL-3.0
Brief settings
- Nozzle °C 220
- Bed °C 65
- Fan min % 50
- Fan max % 100
- Max volumetric mm³/s 18
- Filament type PLA
When to use
- Good cooling helps overhangs; keep bed clean for first-layer grip.
- After importing, run a small temperature tower before long jobs.
Official Bambu Lab preset imported from Bambu Studio profiles.
Source: Bambu PLA Glow @BBL A1M
Inheritance: Bambu PLA Glow @BBL A1M → Bambu PLA Glow @base → fdm_filament_pla → fdm_filament_common
Max volumetric speed: 18 mm³/s
Detailed settings
Resolved official preset (inheritance flattened).
| Preset name | Bambu PLA Glow @BBL A1M |
|---|---|
| Filament type | PLA |
| Vendor | Bambu Lab |
| Nozzle °C | 220 |
| Nozzle min °C | 190 |
| Nozzle max °C | 240 |
| Nozzle °C (1st layer) | 220 |
| Bed °C (hot plate) | 65 |
| Bed °C (1st layer) | 65 |
| Bed °C (cool plate) | 35 |
| Bed °C (engineering plate) | 0 |
| Bed °C (textured) | 65 |
| Fan min % | 50 |
| Fan max % | 100 |
| Fan cooling layer time (s) | 80 |
| No fan for first layers | 1 |
| Max volumetric (mm³/s) | 18 |
| Flow ratio | 0.98 |
| Density (g/cm³) | 1.26 |
| Diameter (mm) | 1.75 |
| Slow down layer time (s) | 8 |
| Slow down min speed | 20 |
| Overhang fan % | 100 |
| Compatible printers | Bambu Lab A1 mini 0.4 nozzle, Bambu Lab A1 mini 0.6 nozzle, Bambu Lab A1 mini 0.8 nozzle |
| Aux cooling fan % | 70 |
| Air filtration | 0 |
| Exhaust fan % | 70 |
| Chamber °C | 0 |