3DSettings
← All settings Official Bambu
Generic EVA @BBL A1M
Bambu Lab A1 mini · EVA · Bambu Studio
Original profile: Generic EVA @BBL A1M · AGPL-3.0
Brief settings
- Nozzle °C 210
- Bed °C 55
- Fan min % 100
- Fan max % 100
- Max volumetric mm³/s 12
- Filament type EVA
When to use
- Treat these as a baseline for Bambu Lab A1 mini — tune for your exact filament brand.
- After importing, run a small temperature tower before long jobs.
Official Bambu Lab preset imported from Bambu Studio profiles.
Source: Generic EVA @BBL A1M
Inheritance: Generic EVA @BBL A1M → Generic EVA @base → fdm_filament_eva → fdm_filament_common
Max volumetric speed: 12 mm³/s
Detailed settings
Resolved official preset (inheritance flattened).
| Preset name | Generic EVA @BBL A1M |
|---|---|
| Filament type | EVA |
| Vendor | Generic |
| Nozzle °C | 210 |
| Nozzle min °C | 175 |
| Nozzle max °C | 220 |
| Nozzle °C (1st layer) | 210 |
| Bed °C (hot plate) | 55 |
| Bed °C (1st layer) | 55 |
| Bed °C (cool plate) | 35 |
| Bed °C (engineering plate) | 0 |
| Bed °C (textured) | 55 |
| Fan min % | 100 |
| Fan max % | 100 |
| Fan cooling layer time (s) | 100 |
| No fan for first layers | 1 |
| Max volumetric (mm³/s) | 12 |
| Flow ratio | 1 |
| Density (g/cm³) | 0.94 |
| Diameter (mm) | 1.75 |
| Slow down layer time (s) | 4 |
| Slow down min speed | 20 |
| Overhang fan % | 100 |
| Compatible printers | Bambu Lab A1 mini 0.4 nozzle, Bambu Lab A1 mini 0.8 nozzle, Bambu Lab A1 mini 0.6 nozzle |
| Aux cooling fan % | 70 |
| Air filtration | 0 |
| Exhaust fan % | 70 |
| Chamber °C | 0 |