3DSettings
← All settings Official Bambu
Generic PCTG @BBL A1M
Bambu Lab A1 mini · PCTG · Bambu Studio
Original profile: Generic PCTG @BBL A1M · AGPL-3.0
Brief settings
- Nozzle °C 255
- Bed °C 70
- Fan min % 10
- Fan max % 40
- Max volumetric mm³/s 6
- Filament type PCTG
When to use
- Engineering filament: dry thoroughly and prefer a warm chamber when possible.
- After importing, run a small temperature tower before long jobs.
Official Bambu Lab preset imported from Bambu Studio profiles.
Source: Generic PCTG @BBL A1M
Inheritance: Generic PCTG @BBL A1M → Generic PCTG @base → fdm_filament_pctg → fdm_filament_common
Max volumetric speed: 6 mm³/s
Detailed settings
Resolved official preset (inheritance flattened).
| Preset name | Generic PCTG @BBL A1M |
|---|---|
| Filament type | PCTG |
| Vendor | Generic |
| Nozzle °C | 255 |
| Nozzle min °C | 240 |
| Nozzle max °C | 270 |
| Nozzle °C (1st layer) | 255 |
| Bed °C (hot plate) | 70 |
| Bed °C (1st layer) | 70 |
| Bed °C (cool plate) | 0 |
| Bed °C (engineering plate) | 70 |
| Bed °C (textured) | 70 |
| Fan min % | 10 |
| Fan max % | 40 |
| Fan cooling layer time (s) | 30 |
| No fan for first layers | 3 |
| Max volumetric (mm³/s) | 6 |
| Flow ratio | 0.95 |
| Density (g/cm³) | 1.29 |
| Diameter (mm) | 1.75 |
| Slow down layer time (s) | 12 |
| Slow down min speed | 10 |
| Overhang fan % | 90 |
| Compatible printers | Bambu Lab A1 mini 0.4 nozzle, Bambu Lab A1 mini 0.6 nozzle, Bambu Lab A1 mini 0.8 nozzle |
| Aux cooling fan % | 0 |
| Air filtration | 0 |
| Exhaust fan % | 70 |
| Chamber °C | 0 |