3DSettings
← All settings Official Bambu
Bambu PA6-CF @BBL X1C 0.6 nozzle
Bambu Lab X1 Carbon · PA6-CF · Bambu Studio
Original profile: Bambu PA6-CF @BBL X1C 0.6 nozzle · AGPL-3.0
Brief settings
- Nozzle °C 275
- Bed °C 100
- Fan min % 10
- Fan max % 30
- Max volumetric mm³/s 8
- Filament type PA6-CF
When to use
- Engineering filament: dry thoroughly and prefer a warm chamber when possible.
- After importing, run a small temperature tower before long jobs.
Official Bambu Lab preset imported from Bambu Studio profiles.
Source: Bambu PA6-CF @BBL X1C 0.6 nozzle
Inheritance: Bambu PA6-CF @BBL X1C 0.6 nozzle → Bambu PA6-CF @base → fdm_filament_pa → fdm_filament_common
Max volumetric speed: 8 mm³/s
Detailed settings
Resolved official preset (inheritance flattened).
| Preset name | Bambu PA6-CF @BBL X1C 0.6 nozzle |
|---|---|
| Filament type | PA6-CF |
| Vendor | Bambu Lab |
| Nozzle °C | 275, 275 |
| Nozzle min °C | 260 |
| Nozzle max °C | 300 |
| Nozzle °C (1st layer) | 275, 275 |
| Bed °C (hot plate) | 100 |
| Bed °C (1st layer) | 100 |
| Bed °C (cool plate) | 0 |
| Bed °C (engineering plate) | 100 |
| Bed °C (textured) | 100 |
| Fan min % | 10 |
| Fan max % | 30 |
| Fan cooling layer time (s) | 5 |
| No fan for first layers | 3 |
| Max volumetric (mm³/s) | 8, 10 |
| Flow ratio | 0.96, 0.96 |
| Density (g/cm³) | 1.10 |
| Diameter (mm) | 1.75 |
| Slow down layer time (s) | 2 |
| Slow down min speed | 20, 20 |
| Overhang fan % | 40 |
| Compatible printers | Bambu Lab X1 Carbon 0.6 nozzle, Bambu Lab X1 Carbon 0.8 nozzle, Bambu Lab P1P 0.6 nozzle, Bambu Lab P1P 0.8 nozzle, Bambu Lab P1S 0.6 nozzle, Bambu Lab P1S 0.8 nozzle |
| Retraction length | nil, 0.6 |
| Aux cooling fan % | 0 |
| Air filtration | 1 |
| Exhaust fan % | 70 |
| Chamber °C | 0 |