3DSettings
← All settings Official Bambu
Bambu Support For PA/PET @BBL X1C
Bambu Lab X1 Carbon · PA · Bambu Studio
Original profile: Bambu Support For PA/PET @BBL X1C · AGPL-3.0
Brief settings
- Nozzle °C 280
- Bed °C 100
- Fan min % 0
- Fan max % 60
- Max volumetric mm³/s 8
- Filament type PA
When to use
- Engineering filament: dry thoroughly and prefer a warm chamber when possible.
- After importing, run a small temperature tower before long jobs.
Official Bambu Lab preset imported from Bambu Studio profiles.
Source: Bambu Support For PA/PET @BBL X1C
Inheritance: Bambu Support For PA/PET @BBL X1C → Bambu Support For PA/PET @base → fdm_filament_pa → fdm_filament_common
Max volumetric speed: 8 mm³/s
Detailed settings
Resolved official preset (inheritance flattened).
| Preset name | Bambu Support For PA/PET @BBL X1C |
|---|---|
| Filament type | PA |
| Vendor | Bambu Lab |
| Nozzle °C | 280, 280 |
| Nozzle min °C | 260 |
| Nozzle max °C | 300 |
| Nozzle °C (1st layer) | 280, 280 |
| Bed °C (hot plate) | 100 |
| Bed °C (1st layer) | 100 |
| Bed °C (cool plate) | 0 |
| Bed °C (engineering plate) | 100 |
| Bed °C (textured) | 100 |
| Fan min % | 0 |
| Fan max % | 60 |
| Fan cooling layer time (s) | 10 |
| No fan for first layers | 3 |
| Max volumetric (mm³/s) | 8, 8 |
| Flow ratio | 1, 1 |
| Density (g/cm³) | 1.22 |
| Diameter (mm) | 1.75 |
| Slow down layer time (s) | 6 |
| Slow down min speed | 20, 20 |
| Overhang fan % | 30 |
| Compatible printers | Bambu Lab X1 Carbon 0.4 nozzle, Bambu Lab X1 Carbon 0.6 nozzle, Bambu Lab X1 Carbon 0.8 nozzle, Bambu Lab X1 0.4 nozzle, Bambu Lab X1 0.6 nozzle, Bambu Lab X1 0.8 nozzle, Bambu Lab P1S 0.4 nozzle, Bambu Lab P1S 0.6 nozzle, Bambu Lab P1S 0.8 nozzle, Bambu Lab X1E 0.4 nozzle, Bambu Lab X1E 0.6 nozzle, Bambu Lab X1E 0.8 nozzle |
| Aux cooling fan % | 0 |
| Air filtration | 1 |
| Exhaust fan % | 70 |
| Chamber °C | 60 |