3DSettings
← All settings Official Bambu
Bambu TPU 95A HF @BBL H2D 0.4 nozzle
Bambu Lab H2D · TPU · Bambu Studio
Original profile: Bambu TPU 95A HF @BBL H2D 0.4 nozzle · AGPL-3.0
Brief settings
- Nozzle °C 230
- Bed °C 35
- Fan min % 100
- Fan max % 100
- Max volumetric mm³/s 12
- Filament type TPU
When to use
- Print slower with lower retraction; direct-drive extruders handle TPU best.
- After importing, run a small temperature tower before long jobs.
Official Bambu Lab preset imported from Bambu Studio profiles.
Source: Bambu TPU 95A HF @BBL H2D 0.4 nozzle
Inheritance: Bambu TPU 95A HF @BBL H2D 0.4 nozzle → Bambu TPU 95A HF @BBL H2D → Bambu TPU 95A HF @base → fdm_filament_tpu → fdm_filament_common
Max volumetric speed: 12 mm³/s
Detailed settings
Resolved official preset (inheritance flattened).
| Preset name | Bambu TPU 95A HF @BBL H2D 0.4 nozzle |
|---|---|
| Filament type | TPU |
| Vendor | Bambu Lab |
| Nozzle °C | 230, 230, 240, 230 |
| Nozzle min °C | 200 |
| Nozzle max °C | 250 |
| Nozzle °C (1st layer) | 230, 230, 240, 230 |
| Bed °C (hot plate) | 35 |
| Bed °C (1st layer) | 35 |
| Bed °C (cool plate) | 30 |
| Bed °C (engineering plate) | 35 |
| Bed °C (textured) | 35 |
| Fan min % | 100 |
| Fan max % | 100 |
| Fan cooling layer time (s) | 100 |
| No fan for first layers | 1 |
| Max volumetric (mm³/s) | 12, 12, 16, 12 |
| Flow ratio | 1, 1, 0.99, 1 |
| Density (g/cm³) | 1.22 |
| Diameter (mm) | 1.75 |
| Slow down layer time (s) | 8 |
| Slow down min speed | 10, 10, 40, 10 |
| Overhang fan % | 100 |
| Compatible printers | Bambu Lab H2D 0.4 nozzle |
| Retraction length | 2, 2, 0.8, 2 |
| Retraction speed | 10, 10, 50, 10 |
| Aux cooling fan % | 100 |
| Air filtration | 0 |
| Exhaust fan % | 70 |
| Chamber °C | 0 |