3DSettings
← All settings Official Bambu
Bambu PLA Matte @BBL P1S 0.6 nozzle
Bambu Lab P1S · PLA · Bambu Studio
Original profile: Bambu PLA Matte @BBL P1S 0.6 nozzle · AGPL-3.0
Brief settings
- Nozzle °C 220
- Bed °C 55
- Fan min % 100
- Fan max % 100
- Max volumetric mm³/s 22
- Filament type PLA
When to use
- Good cooling helps overhangs; keep bed clean for first-layer grip.
- After importing, run a small temperature tower before long jobs.
Official Bambu Lab preset imported from Bambu Studio profiles.
Source: Bambu PLA Matte @BBL P1S 0.6 nozzle
Inheritance: Bambu PLA Matte @BBL P1S 0.6 nozzle → Bambu PLA Matte @base → fdm_filament_pla → fdm_filament_common
Max volumetric speed: 22 mm³/s
Detailed settings
Resolved official preset (inheritance flattened).
| Preset name | Bambu PLA Matte @BBL P1S 0.6 nozzle |
|---|---|
| Filament type | PLA |
| Vendor | Bambu Lab |
| Nozzle °C | 220, 220 |
| Nozzle min °C | 190 |
| Nozzle max °C | 240 |
| Nozzle °C (1st layer) | 220, 220 |
| Bed °C (hot plate) | 55 |
| Bed °C (1st layer) | 55 |
| Bed °C (cool plate) | 35 |
| Bed °C (engineering plate) | 0 |
| Bed °C (textured) | 55 |
| Fan min % | 100 |
| Fan max % | 100 |
| Fan cooling layer time (s) | 100 |
| No fan for first layers | 1 |
| Max volumetric (mm³/s) | 22, 29 |
| Flow ratio | 0.98, 0.985 |
| Density (g/cm³) | 1.32 |
| Diameter (mm) | 1.75 |
| Slow down layer time (s) | 4 |
| Slow down min speed | 20, 20 |
| Overhang fan % | 100 |
| Compatible printers | Bambu Lab P1S 0.6 nozzle |
| Retraction length | nil, 0.4 |
| Retraction speed | nil, 40 |
| Aux cooling fan % | 70 |
| Air filtration | 0 |
| Exhaust fan % | 70 |
| Chamber °C | 0 |