← All settings Official Bambu

Bambu PLA-CF @BBL H2DP 0.4 nozzle

Bambu Lab H2D Pro · PLA-CF · Bambu Studio · Updated 2026-07-24

Open official source

Original profile: Bambu PLA-CF @BBL H2DP 0.4 nozzle · AGPL-3.0

Brief settings

Nozzle °C 230
Bed °C 55
Fan min % 100
Fan max % 100
Max volumetric mm³/s 15
Filament type PLA-CF

When to use

Good cooling helps overhangs; keep bed clean for first-layer grip.
After importing, run a small temperature tower before long jobs.

Official Bambu Lab preset imported from Bambu Studio profiles.

Source: Bambu PLA-CF @BBL H2DP 0.4 nozzle

Inheritance: Bambu PLA-CF @BBL H2DP 0.4 nozzle → Bambu PLA-CF @base → fdm_filament_pla → fdm_filament_common

Max volumetric speed: 15 mm³/s

Detailed settings

Resolved official preset (inheritance flattened).

Preset name	`Bambu PLA-CF @BBL H2DP 0.4 nozzle`
Filament type	`PLA-CF`
Vendor	`Bambu Lab`
Nozzle °C	`230, 230`
Nozzle min °C	`210`
Nozzle max °C	`250`
Nozzle °C (1st layer)	`230, 230`
Bed °C (hot plate)	`55`
Bed °C (1st layer)	`55`
Bed °C (cool plate)	`45`
Bed °C (engineering plate)	`55`
Bed °C (textured)	`55`
Fan min %	`100`
Fan max %	`100`
Fan cooling layer time (s)	`100`
No fan for first layers	`1`
Max volumetric (mm³/s)	`15, 15`
Flow ratio	`0.98, 0.98`
Density (g/cm³)	`1.22`
Diameter (mm)	`1.75`
Slow down layer time (s)	`8`
Slow down min speed	`20, 20`
Overhang fan %	`100`
Compatible printers	`Bambu Lab H2D Pro 0.4 nozzle`
Retraction length	`0.4, 0.4`
Aux cooling fan %	`0`
Air filtration	`0`
Exhaust fan %	`70`
Chamber °C	`0`