3DSettings
← All settings Official Bambu
Bambu PC FR @BBL H2D 0.4 nozzle
Bambu Lab H2D · PC · Bambu Studio
Original profile: Bambu PC FR @BBL H2D 0.4 nozzle · AGPL-3.0
Brief settings
- Nozzle °C 280
- Bed °C 110
- Fan min % 10
- Fan max % 40
- Max volumetric mm³/s 18
- Filament type PC
When to use
- Engineering filament: dry thoroughly and prefer a warm chamber when possible.
- After importing, run a small temperature tower before long jobs.
Official Bambu Lab preset imported from Bambu Studio profiles.
Source: Bambu PC FR @BBL H2D 0.4 nozzle
Inheritance: Bambu PC FR @BBL H2D 0.4 nozzle → Bambu PC FR @base → fdm_filament_pc → fdm_filament_common
Max volumetric speed: 18 mm³/s
Detailed settings
Resolved official preset (inheritance flattened).
| Preset name | Bambu PC FR @BBL H2D 0.4 nozzle |
|---|---|
| Filament type | PC |
| Vendor | Bambu Lab |
| Nozzle °C | 280, 280 |
| Nozzle min °C | 260 |
| Nozzle max °C | 290 |
| Nozzle °C (1st layer) | 270, 270 |
| Bed °C (hot plate) | 110 |
| Bed °C (1st layer) | 110 |
| Bed °C (cool plate) | 0 |
| Bed °C (engineering plate) | 110 |
| Bed °C (textured) | 110 |
| Fan min % | 10 |
| Fan max % | 40 |
| Fan cooling layer time (s) | 30 |
| No fan for first layers | 3 |
| Max volumetric (mm³/s) | 18, 18 |
| Flow ratio | 0.94, 0.94 |
| Density (g/cm³) | 1.19 |
| Diameter (mm) | 1.75 |
| Slow down layer time (s) | 12 |
| Slow down min speed | 20, 20 |
| Overhang fan % | 60 |
| Compatible printers | Bambu Lab H2D 0.4 nozzle |
| Aux cooling fan % | 0 |
| Air filtration | 0 |
| Exhaust fan % | 70 |
| Chamber °C | 60 |