3DSettings
← All settings Official Bambu
Generic HIPS @BBL X1C 0.2 nozzle
Bambu Lab X1 Carbon · HIPS · Bambu Studio
Original profile: Generic HIPS @BBL X1C 0.2 nozzle · AGPL-3.0
Brief settings
- Nozzle °C 240
- Bed °C 90
- Fan min % 0
- Fan max % 60
- Max volumetric mm³/s 0.5
- Filament type HIPS
When to use
- Treat these as a baseline for Bambu Lab X1 Carbon — tune for your exact filament brand.
- After importing, run a small temperature tower before long jobs.
Official Bambu Lab preset imported from Bambu Studio profiles.
Source: Generic HIPS @BBL X1C 0.2 nozzle
Inheritance: Generic HIPS @BBL X1C 0.2 nozzle → Generic HIPS @base → fdm_filament_hips → fdm_filament_common
Max volumetric speed: 0.5 mm³/s
Detailed settings
Resolved official preset (inheritance flattened).
| Preset name | Generic HIPS @BBL X1C 0.2 nozzle |
|---|---|
| Filament type | HIPS |
| Vendor | Generic |
| Nozzle °C | 240, 240 |
| Nozzle min °C | 220 |
| Nozzle max °C | 270 |
| Nozzle °C (1st layer) | 240, 240 |
| Bed °C (hot plate) | 90 |
| Bed °C (1st layer) | 90 |
| Bed °C (cool plate) | 0 |
| Bed °C (engineering plate) | 90 |
| Bed °C (textured) | 90 |
| Fan min % | 0 |
| Fan max % | 60 |
| Fan cooling layer time (s) | 10 |
| No fan for first layers | 3 |
| Max volumetric (mm³/s) | 0.5, 0.5 |
| Flow ratio | 1, 1 |
| Density (g/cm³) | 1.06 |
| Diameter (mm) | 1.75 |
| Slow down layer time (s) | 6 |
| Slow down min speed | 20, 20 |
| Overhang fan % | 80 |
| Compatible printers | Bambu Lab X1 Carbon 0.2 nozzle, Bambu Lab X1 0.2 nozzle, Bambu Lab P1P 0.2 nozzle, Bambu Lab P1S 0.2 nozzle, Bambu Lab X1E 0.2 nozzle |
| Aux cooling fan % | 0 |
| Air filtration | 0 |
| Exhaust fan % | 70 |
| Chamber °C | 0 |