3DSettings
← All settings Official Bambu
Generic EVA @BBL X1C
Bambu Lab X1 Carbon · EVA · Bambu Studio
Original profile: Generic EVA @BBL X1C · AGPL-3.0
Brief settings
- Nozzle °C 210
- Bed °C 55
- Fan min % 100
- Fan max % 100
- Max volumetric mm³/s 12
- Filament type EVA
When to use
- Treat these as a baseline for Bambu Lab X1 Carbon — tune for your exact filament brand.
- After importing, run a small temperature tower before long jobs.
Official Bambu Lab preset imported from Bambu Studio profiles.
Source: Generic EVA @BBL X1C
Inheritance: Generic EVA @BBL X1C → Generic EVA @base → fdm_filament_eva → fdm_filament_common
Max volumetric speed: 12 mm³/s
Detailed settings
Resolved official preset (inheritance flattened).
| Preset name | Generic EVA @BBL X1C |
|---|---|
| Filament type | EVA |
| Vendor | Generic |
| Nozzle °C | 210, 210 |
| Nozzle min °C | 175 |
| Nozzle max °C | 220 |
| Nozzle °C (1st layer) | 210, 210 |
| Bed °C (hot plate) | 55 |
| Bed °C (1st layer) | 55 |
| Bed °C (cool plate) | 35 |
| Bed °C (engineering plate) | 0 |
| Bed °C (textured) | 55 |
| Fan min % | 100 |
| Fan max % | 100 |
| Fan cooling layer time (s) | 100 |
| No fan for first layers | 1 |
| Max volumetric (mm³/s) | 12, 12 |
| Flow ratio | 1, 1 |
| Density (g/cm³) | 0.94 |
| Diameter (mm) | 1.75 |
| Slow down layer time (s) | 4 |
| Slow down min speed | 20, 20 |
| Overhang fan % | 100 |
| Compatible printers | Bambu Lab P1P 0.4 nozzle, Bambu Lab P1P 0.6 nozzle, Bambu Lab P1P 0.8 nozzle, Bambu Lab P1S 0.4 nozzle, Bambu Lab P1S 0.6 nozzle, Bambu Lab P1S 0.8 nozzle, Bambu Lab X1 0.4 nozzle, Bambu Lab X1 0.6 nozzle, Bambu Lab X1 0.8 nozzle, Bambu Lab X1 Carbon 0.4 nozzle, Bambu Lab X1 Carbon 0.6 nozzle, Bambu Lab X1 Carbon 0.8 nozzle, Bambu Lab X1E 0.4 nozzle, Bambu Lab X1E 0.6 nozzle, Bambu Lab X1E 0.8 nozzle |
| Aux cooling fan % | 70 |
| Air filtration | 0 |
| Exhaust fan % | 70 |
| Chamber °C | 0 |