3DSettings
← All settings Official Bambu
Generic ASA @BBL P1P 0.2 nozzle
Bambu Lab P1P · ASA · Bambu Studio
Original profile: Generic ASA @BBL P1P 0.2 nozzle · AGPL-3.0
Brief settings
- Nozzle °C 260
- Bed °C 100
- Fan min % 10
- Fan max % 80
- Max volumetric mm³/s 2
- Filament type ASA
When to use
- Use an enclosure; keep drafts away to reduce warping and layer splits.
- Dry the spool if prints look fuzzy or weak (ASA/ABS are hygroscopic).
- After importing, run a small temperature tower before long jobs.
Official Bambu Lab preset imported from Bambu Studio profiles.
Source: Generic ASA @BBL P1P 0.2 nozzle
Inheritance: Generic ASA @BBL P1P 0.2 nozzle → Generic ASA @base → fdm_filament_asa → fdm_filament_common
Max volumetric speed: 2 mm³/s
Detailed settings
Resolved official preset (inheritance flattened).
| Preset name | Generic ASA @BBL P1P 0.2 nozzle |
|---|---|
| Filament type | ASA |
| Vendor | Generic |
| Nozzle °C | 260, 260 |
| Nozzle min °C | 240 |
| Nozzle max °C | 280 |
| Nozzle °C (1st layer) | 260, 260 |
| Bed °C (hot plate) | 100 |
| Bed °C (1st layer) | 100 |
| Bed °C (cool plate) | 0 |
| Bed °C (engineering plate) | 100 |
| Bed °C (textured) | 100 |
| Fan min % | 10 |
| Fan max % | 80 |
| Fan cooling layer time (s) | 35 |
| No fan for first layers | 3 |
| Max volumetric (mm³/s) | 2, 2 |
| Flow ratio | 0.95 |
| Density (g/cm³) | 1.04 |
| Diameter (mm) | 1.75 |
| Slow down layer time (s) | 3 |
| Slow down min speed | 20, 20 |
| Overhang fan % | 80 |
| Compatible printers | Bambu Lab P1P 0.2 nozzle |
| Aux cooling fan % | 0 |
| Air filtration | 1 |
| Exhaust fan % | 70 |
| Chamber °C | 0 |