3DSettings
← All settings Official Bambu
Fiberon PA12-CF @BBL H2D
Bambu Lab H2D · PA-CF · Bambu Studio
Original profile: Fiberon PA12-CF @BBL H2D · AGPL-3.0
Brief settings
- Nozzle °C 300
- Bed °C 40
- Fan min % 0
- Fan max % 100
- Max volumetric mm³/s 14
- Filament type PA-CF
When to use
- Engineering filament: dry thoroughly and prefer a warm chamber when possible.
- After importing, run a small temperature tower before long jobs.
Official Bambu Lab preset imported from Bambu Studio profiles.
Source: Fiberon PA12-CF @BBL H2D
Inheritance: Fiberon PA12-CF @BBL H2D → Fiberon PA12-CF @base → fdm_filament_pa → fdm_filament_common
Max volumetric speed: 14 mm³/s
Detailed settings
Resolved official preset (inheritance flattened).
| Preset name | Fiberon PA12-CF @BBL H2D |
|---|---|
| Filament type | PA-CF |
| Vendor | Polymaker |
| Nozzle °C | 300, 300 |
| Nozzle min °C | 260, 260 |
| Nozzle max °C | 300, 300 |
| Nozzle °C (1st layer) | 300, 300 |
| Bed °C (hot plate) | 40 |
| Bed °C (1st layer) | 40 |
| Bed °C (cool plate) | 0 |
| Bed °C (engineering plate) | 40 |
| Bed °C (textured) | 40 |
| Fan min % | 0 |
| Fan max % | 100 |
| Fan cooling layer time (s) | 15 |
| No fan for first layers | 3 |
| Max volumetric (mm³/s) | 14, 14 |
| Flow ratio | 0.95 |
| Density (g/cm³) | 1.06 |
| Diameter (mm) | 1.75 |
| Slow down layer time (s) | 2 |
| Slow down min speed | 20, 20 |
| Overhang fan % | 100 |
| Compatible printers | Bambu Lab H2D 0.4 nozzle, Bambu Lab H2D 0.6 nozzle, Bambu Lab H2D 0.8 nozzle |
| Aux cooling fan % | 0 |
| Air filtration | 1 |
| Exhaust fan % | 70 |
| Chamber °C | 0 |