← Printer catalog · Slicer settings
Recommended slicer settings for the Zortrax M300 (Zortrax) 3D printer. Profiles cover PLA, PETG, ABS, TPU, NYLON, PC with starting nozzle/bed temperatures, fan, and speed guidance. Build volume 300x300x300. Fused Deposition Modeling (FDM / FFF). Common slicers: Z-SUITE. Use these as a baseline and fine-tune for your filament brand and enclosure.
PLAPETGABSTPUNYLONPC
Starting temps and speeds for this machine. Generated defaults are a baseline — tune for your filament.
| Profile | Filament | Temp | Speed | Fan | Slicer |
|---|---|---|---|---|---|
| Zortrax M300 — ABS starting settings defaults | ABS | 250/100 | vol 11 mm³/s | 0-20 | Z-SUITE |
| Zortrax M300 — NYLON starting settings defaults | NYLON | 260/90 | vol 8 mm³/s | 0-30 | Z-SUITE |
| Zortrax M300 — PC starting settings defaults | PC | 270/110 | vol 8 mm³/s | 0-20 | Z-SUITE |
| Zortrax M300 — PETG starting settings defaults | PETG | 240/80 | vol 12 mm³/s | 30-50 | Z-SUITE |
| Zortrax M300 — PLA starting settings defaults | PLA | 210/60 | vol 15 mm³/s | 100 | Z-SUITE |
| Zortrax M300 — TPU starting settings defaults | TPU | 230/40 | vol 3 mm³/s | 50-80 | Z-SUITE |
| Type | Home |
|---|---|
| Brand | Zortrax |
| Сountry | Poland |
| Print technology | Fused Deposition Modeling (FDM / FFF) |
| Nozzle quantity | 1 |
| LCD Screen | Yes |
| Print Area | 300x300x300 |
| Bed | Heated |
| Material | ABS, PLA, Nylon, PC, Petg, TPU |
| Material diameter | 1.75 |
| Host computer software | Z-SUITE |
| Input method | Card Reader |
| Machine size | 300x300x300 |
| weight, kg | 30 kg |
The Zortrax M300 is a home 3D printer from Poland that uses Fused Deposition Modeling technology. It has a single nozzle and a heated bed, with a print area of 300x300x300. The printer can handle a variety of materials, including ABS, PLA, Nylon, PC, Petg, and TPU, with a diameter of 1.75. The Z-SUITE software is used to control the printer, and it has a card reader for input. The printer weighs 30kg and has an LCD screen. No print speed is specified.
3DSettings