3DSettings
The Z-Bolt Plus is a 3D printer manufactured by Z-Bolt Company in Belarus. It has a heated bed, a single nozzle, and it supports prints up to 200mm/s. It is compatible with Photopolymer resins of 1.75mm diameter and can be connected to a host computer via USB and Card Reader. Its physical dimensions are 300x200x335 and it weighs 13kg. It can be configured with the following general slicer settings: Raft/Brims: Yes, Number of Perimeters: 3, Layer Height: 0.1mm, Supports: Yes, Retraction: Yes, Print Speed: 200mm/s, Infill: 0-25%, Bed Temp: 70-90°C, Print Temp: 70-90°C.
← Printer catalog · Slicer settings
Z-Bolt Plus slicer settings
Recommended slicer settings for the Z-Bolt Plus (Z-Bolt Co.) 3D printer. Profiles cover PLA, PETG, ABS with starting nozzle/bed temperatures, fan, and speed guidance. Build volume 300×200х335. Fused Deposition Modeling (FDM / FFF). Use these as a baseline and fine-tune for your filament brand and enclosure.
PLAPETGABS
Z-Bolt Plus slicer settings
Starting temps and speeds for this machine. Generated defaults are a baseline — tune for your filament.
| Profile | Filament | Temp | Speed | Fan | Slicer |
|---|---|---|---|---|---|
| Z-Bolt Plus — ABS starting settings defaults | ABS | 250/100 | 200 mm/s | 0-20 | Cura |
| Z-Bolt Plus — PETG starting settings defaults | PETG | 240/80 | 200 mm/s | 30-50 | Cura |
| Z-Bolt Plus — PLA starting settings defaults | PLA | 210/60 | 200 mm/s | 100 | Cura |
Tech specs
| Type | Home |
|---|---|
| Brand | Z-Bolt Co. |
| Сountry | Republic of Belarus |
| Print technology | Fused Deposition Modeling (FDM / FFF) |
| Nozzle quantity | 1 |
| Print speed | up to 200 mm / s |
| LCD Screen | Yes |
| Print Area | 300×200х335 |
| Bed | Heated |
| Material | Photopolymer resin |
| Material diameter | 1.75 |
| Input method | USB, Card Reader |
| Machine size | 300×200х335 |
| weight, kg | 13 kg |