3DSettings
This tech spec covers the witbox 3D printer, a home 3D printer made in Spain by bq brand. It has one nozzle which can print at speeds up to 80 mm/s, and has an LCD screen to control parameters. The bed is not heated and it is capable of printing with ABS, PLA, and CPE filament with a diameter of 1.75mm. Instructions on the printer can be accessed with Open Source host computer software and input can be done via USB or a card reader. The machine size is 297x210x200 and has a maximum weight of 6 kg.
← Printer catalog · Slicer settings
WitBox slicer settings
Recommended slicer settings for the WitBox (bq) 3D printer. Profiles cover PLA, ABS with starting nozzle/bed temperatures, fan, and speed guidance. Build volume 297x210x200. Fused Deposition Modeling (FDM / FFF). Common slicers: Open Source. Use these as a baseline and fine-tune for your filament brand and enclosure.
PLAABS
WitBox slicer settings
Starting temps and speeds for this machine. Generated defaults are a baseline — tune for your filament.
| Profile | Filament | Temp | Speed | Fan | Slicer |
|---|---|---|---|---|---|
| WitBox — ABS starting settings defaults | ABS | 250/100 | 80 mm/s | 0-20 | Open Source |
| WitBox — PLA starting settings defaults | PLA | 210/60 | 80 mm/s | 100 | Open Source |
Tech specs
| Type | Home |
|---|---|
| Brand | bq |
| Сountry | Spain |
| Print technology | Fused Deposition Modeling (FDM / FFF) |
| Nozzle quantity | 1 |
| Print speed | 80 mm / s |
| LCD Screen | Yes |
| Print Area | 297x210x200 |
| Bed | Without heated |
| Material | ABS, PLA, CPE |
| Material diameter | 1.75 |
| Host computer software | Open Source |
| Input method | usb, card reader |
| Machine size | 297x210x200 |
| weight, kg | kg |