3DSettings
← Printer catalog · Slicer settings
Uniqbot SPP slicer settings
Recommended slicer settings for the Uniqbot SPP (UNIMATECH) 3D printer. Profiles cover PLA, PETG, ABS with starting nozzle/bed temperatures, fan, and speed guidance. Build volume 300х300х300. Fused Deposition Modeling (FDM / FFF). Use these as a baseline and fine-tune for your filament brand and enclosure.
PLAPETGABS
Uniqbot SPP slicer settings
Starting temps and speeds for this machine. Generated defaults are a baseline — tune for your filament.
| Profile | Filament | Temp | Speed | Fan | Slicer |
|---|---|---|---|---|---|
| Uniqbot SPP — ABS starting settings defaults | ABS | 250/100 | vol 11 mm³/s | 0-20 | Cura |
| Uniqbot SPP — PETG starting settings defaults | PETG | 240/80 | vol 12 mm³/s | 30-50 | Cura |
| Uniqbot SPP — PLA starting settings defaults | PLA | 210/60 | vol 15 mm³/s | 100 | Cura |
Tech specs
| Type | Commercial |
|---|---|
| Brand | UNIMATECH |
| Сountry | Russia |
| Print technology | Fused Deposition Modeling (FDM / FFF) |
| Nozzle quantity | 1 |
| Print speed | 50 cm3 / hour |
| LCD Screen | Yes |
| Print Area | 300х300х300 |
| Bed | Heated |
| Material | ABS, PLA, Petg |
| Input method | USB |
| Machine size | 300х300х300 |
| weight, kg | 105 kg |