3DSettings
The TRONXY X1 is a 3D printer made by Shenzhen Tronxy Technology Co, located in China. It has a Fused Deposition Modeling (FDM / FFF) technology and a single nozzle. The print speed of this printer is 150x150x150. It has an LCD Screen and supports Metal powders, 316L, TA6V and TISN Alloy materials. Its material diameter is 1.75 and it can be connected and operated through USB, Card Reader.
← Printer catalog · Slicer settings
TRONXY X1 slicer settings
Recommended slicer settings for the TRONXY X1 (Shenzhen Tronxy Technology Co) 3D printer. Profiles cover PLA, PETG, ABS with starting nozzle/bed temperatures, fan, and speed guidance. Fused Deposition Modeling (FDM / FFF). Use these as a baseline and fine-tune for your filament brand and enclosure.
PLAPETGABS
TRONXY X1 slicer settings
Starting temps and speeds for this machine. Generated defaults are a baseline — tune for your filament.
| Profile | Filament | Temp | Speed | Fan | Slicer |
|---|---|---|---|---|---|
| TRONXY X1 — ABS starting settings defaults | ABS | 250/100 | vol 11 mm³/s | 0-20 | Cura |
| TRONXY X1 — PETG starting settings defaults | PETG | 240/80 | vol 12 mm³/s | 30-50 | Cura |
| TRONXY X1 — PLA starting settings defaults | PLA | 210/60 | vol 15 mm³/s | 100 | Cura |
Tech specs
| Type | Home |
|---|---|
| Brand | Shenzhen Tronxy Technology Co |
| Сountry | China |
| Print technology | Fused Deposition Modeling (FDM / FFF) |
| Nozzle quantity | 1 |
| Print speed | 150x150x150. |
| LCD Screen | Yes |
| Bed | Without heated |
| Material | Metal powders, 316L, TA6V, TISN Alloy |
| Material diameter | 1.75 |
| Input method | USB, Card Reader |
| weight, kg | kg |