← Printer catalog · Slicer settings
Recommended slicer settings for the T125 (Kikai Labs) 3D printer. Profiles cover PLA, PETG, ABS with starting nozzle/bed temperatures, fan, and speed guidance. Build volume 200х200х195. Fused Deposition Modeling (FDM / FFF). Use these as a baseline and fine-tune for your filament brand and enclosure.
PLAPETGABS
Starting temps and speeds for this machine. Generated defaults are a baseline — tune for your filament.
| Profile | Filament | Temp | Speed | Fan | Slicer |
|---|---|---|---|---|---|
| T125 — ABS starting settings defaults | ABS | 250/100 | 100 mm/s | 0-20 | Cura |
| T125 — PETG starting settings defaults | PETG | 240/80 | 100 mm/s | 30-50 | Cura |
| T125 — PLA starting settings defaults | PLA | 210/60 | 100 mm/s | 100 | Cura |
| Type | Home |
|---|---|
| Brand | Kikai Labs |
| Сountry | Argentina |
| Print technology | Fused Deposition Modeling (FDM / FFF) |
| Nozzle quantity | 1 |
| Print speed | 100 mm / s |
| Print Area | 200х200х195 |
| Bed | Heated |
| Material | Photopolymer resin |
| Material diameter | 1.75 |
| Input method | USB |
| Machine size | 200х200х195 |
| weight, kg | 12 kg |
The T125 is a home 3D printer made by Kikai Labs from Argentina. It features a Fused Deposition Modeling (FDM/FFF) print technology with one nozzle, a print speed of 100 mm/s, a heated bed, and a 200x200x195mm print area. It has a material diameter of 1.75, weighs 12 kg, and operates with an USB input method. Host computer software is not required. The 3D printer uses photopolymer resin as material.
3DSettings