← Printer catalog · Slicer settings

SUPER HELPER SH105L (3 in 1)

SUPER HELPER SH105L (3 in 1) slicer settings

Recommended slicer settings for the SUPER HELPER SH105L (3 in 1) (WINBO) 3D printer. Profiles cover PLA, PETG, ABS, NYLON with starting nozzle/bed temperatures, fan, and speed guidance. Build volume 105x105x155. Fused Deposition Modeling (FDM / FFF). Common slicers: Winware. Use these as a baseline and fine-tune for your filament brand and enclosure.

PLAPETGABSNYLON

SUPER HELPER SH105L (3 in 1) slicer settings

Starting temps and speeds for this machine. Generated defaults are a baseline — tune for your filament.

Profile Filament Temp Speed Fan Slicer
SUPER HELPER SH105L (3 in 1) — ABS starting settings defaults ABS 250/100 100 mm/s 0-20 Winware
SUPER HELPER SH105L (3 in 1) — NYLON starting settings defaults NYLON 260/90 100 mm/s 0-30 Winware
SUPER HELPER SH105L (3 in 1) — PETG starting settings defaults PETG 240/80 100 mm/s 30-50 Winware
SUPER HELPER SH105L (3 in 1) — PLA starting settings defaults PLA 210/60 100 mm/s 100 Winware
All settings files Print cost

Tech specs

Type Home
Brand WINBO
Сountry China
Print technology Fused Deposition Modeling (FDM / FFF)
Nozzle quantity 1
Print speed 50 – 100 mm / s
LCD Screen Yes
Print Area 105x105x155
Bed Without heated
Material ABS, PLA, Nylon, Petg, SBS
Material diameter 1.75
Host computer software Winware
Input method USB, Card Reader
Machine size 105x105x155
weight, kg 3.7 kg

The SUPER HELPER SH105L is a 3-in-1 home 3D printer made in China by the brand WINBO, using the Fused Deposition Modeling (FDM/FFF) technique. It has a single nozzle, a print speed of 50-100 mm/s, a LCD screen, a build area of 105x105x155, and can print in ABS, PLA, nylon, Petg, and SBS with a material diameter of 1.75mm. It weighs 3.7 kg and has a machine size of 105x105x155. It can connect through USB or card reader and is host computer software runs Winware. General slicer settings for this 3D printer includes layer height, printing speed, infill, flow rate and cooling.

More