3DSettings
This printer is a brand of home type made in the USA using Fused Deposition Modeling (FDM/FFF) technology. It has one nozzle, prints at 50 mm/s, has a heated bed and is compatible with ABS, PLA, and Petg filaments of 1.75mm diameter. This machine is 203x203x203mm in size and weighs 20kg. Its input method is USB. Slicer settings will depend on the host computer software.
← Printer catalog · Slicer settings
Solidoodle 4 slicer settings
Recommended slicer settings for the Solidoodle 4 (Solidoodle) 3D printer. Profiles cover PLA, PETG, ABS with starting nozzle/bed temperatures, fan, and speed guidance. Build volume 203x203x203. Fused Deposition Modeling (FDM / FFF). Use these as a baseline and fine-tune for your filament brand and enclosure.
PLAPETGABS
Solidoodle 4 slicer settings
Starting temps and speeds for this machine. Generated defaults are a baseline — tune for your filament.
| Profile | Filament | Temp | Speed | Fan | Slicer |
|---|---|---|---|---|---|
| Solidoodle 4 — ABS starting settings defaults | ABS | 250/100 | 50 mm/s | 0-20 | Cura |
| Solidoodle 4 — PETG starting settings defaults | PETG | 240/80 | 50 mm/s | 30-50 | Cura |
| Solidoodle 4 — PLA starting settings defaults | PLA | 210/60 | 50 mm/s | 100 | Cura |
Tech specs
| Type | Home |
|---|---|
| Brand | Solidoodle |
| Сountry | USA |
| Print technology | Fused Deposition Modeling (FDM / FFF) |
| Nozzle quantity | 1 |
| Print speed | 50 mm / s |
| Print Area | 203x203x203 |
| Bed | Heated |
| Material | ABS, PLA, Petg |
| Material diameter | 1.75 |
| Input method | USB |
| Machine size | 203x203x203 |
| weight, kg | 20 kg |