3DSettings
Skyone ver2 is a home 3D printer made by 3dlaboratorio in Russia. It utilizes Fused Deposition Modeling (FDM/FFF) technology with a single nozzle and prints at a speed of 100 mm/s. It is designed for use with ULTEM 9085, Peek and other materials with a diameter of 1.75 mm. The print area is 150x200x200 mm and it has a weight of 7 kg. It comes with Repetier-Host as its host computer software. General slicer settings are available on the manufacturer’s website.
← Printer catalog · Slicer settings
Skyone ver2 slicer settings
Recommended slicer settings for the Skyone ver2 (3dlaboratorio) 3D printer. Profiles cover PLA, PETG, ABS with starting nozzle/bed temperatures, fan, and speed guidance. Build volume 150х200х200. Fused Deposition Modeling (FDM / FFF). Common slicers: Repetier-Host. Use these as a baseline and fine-tune for your filament brand and enclosure.
PLAPETGABS
Skyone ver2 slicer settings
Starting temps and speeds for this machine. Generated defaults are a baseline — tune for your filament.
| Profile | Filament | Temp | Speed | Fan | Slicer |
|---|---|---|---|---|---|
| Skyone ver2 — ABS starting settings defaults | ABS | 250/100 | 100 mm/s | 0-20 | Repetier-Host |
| Skyone ver2 — PETG starting settings defaults | PETG | 240/80 | 100 mm/s | 30-50 | Repetier-Host |
| Skyone ver2 — PLA starting settings defaults | PLA | 210/60 | 100 mm/s | 100 | Repetier-Host |
Tech specs
| Type | Home |
|---|---|
| Brand | 3dlaboratorio |
| Сountry | Russia |
| Print technology | Fused Deposition Modeling (FDM / FFF) |
| Nozzle quantity | 1 |
| Print speed | 100 mm / s |
| Print Area | 150х200х200 |
| Material | ULTEM 9085, Peek |
| Material diameter | 1.75 |
| Host computer software | Repetier-Host |
| Machine size | 150х200х200 |
| weight, kg | 7 kg |