3DSettings
Shark Limited Partenrship 3D Home Printer is a fused deposition modeling (FDM/FFF) printer with 1 nozzle, heated bed, and a print area of 220x220x165. It is compatible with ABS and PLA materials with a diameter of 1.75, and supports input via USB and Card Reader. Slicer software required is Pronterface. The machine’s weight is kg.
← Printer catalog · Slicer settings
Shark 3D Printer slicer settings
Recommended slicer settings for the Shark 3D Printer (SHARK Limited Partnership) 3D printer. Profiles cover PLA, ABS with starting nozzle/bed temperatures, fan, and speed guidance. Build volume 220x220x165. Fused Deposition Modeling (FDM / FFF). Common slicers: Pronterface. Use these as a baseline and fine-tune for your filament brand and enclosure.
PLAABS
Shark 3D Printer slicer settings
Starting temps and speeds for this machine. Generated defaults are a baseline — tune for your filament.
| Profile | Filament | Temp | Speed | Fan | Slicer |
|---|---|---|---|---|---|
| Shark 3D Printer — ABS starting settings defaults | ABS | 250/100 | vol 11 mm³/s | 0-20 | Pronterface |
| Shark 3D Printer — PLA starting settings defaults | PLA | 210/60 | vol 15 mm³/s | 100 | Pronterface |
Tech specs
| Type | Home |
|---|---|
| Brand | SHARK Limited Partnership |
| Сountry | Ливан |
| Print technology | Fused Deposition Modeling (FDM / FFF) |
| Nozzle quantity | 1 |
| Print Area | 220x220x165 |
| Bed | Heated |
| Material | ABS, PLA |
| Material diameter | 1.75 |
| Host computer software | Pronterface |
| Input method | USB, Card Reader |
| Machine size | 220x220x165 |
| weight, kg | kg |