← Printer catalog · Slicer settings

Sharebot XXL Plus

Sharebot XXL Plus slicer settings

Recommended slicer settings for the Sharebot XXL Plus (Sharebot) 3D printer. Profiles cover PLA, ABS, NYLON, PC, HIPS, PVA, TPU with starting nozzle/bed temperatures, fan, and speed guidance. Build volume 705x250x200. Fused Deposition Modeling (FDM / FFF). Common slicers: Simplify3D. Use these as a baseline and fine-tune for your filament brand and enclosure.

PLAABSNYLONPCHIPSPVATPU

Sharebot XXL Plus slicer settings

Starting temps and speeds for this machine. Generated defaults are a baseline — tune for your filament.

Profile Filament Temp Speed Fan Slicer
Sharebot XXL Plus — ABS starting settings defaults ABS 250/100 vol 11 mm³/s 0-20 Simplify3D
Sharebot XXL Plus — HIPS starting settings defaults HIPS 240/100 vol 10 mm³/s 20-40 Simplify3D
Sharebot XXL Plus — NYLON starting settings defaults NYLON 260/90 vol 8 mm³/s 0-30 Simplify3D
Sharebot XXL Plus — PC starting settings defaults PC 270/110 vol 8 mm³/s 0-20 Simplify3D
Sharebot XXL Plus — PLA starting settings defaults PLA 210/60 vol 15 mm³/s 100 Simplify3D
Sharebot XXL Plus — PVA starting settings defaults PVA 210/60 vol 6 mm³/s 100 Simplify3D
Sharebot XXL Plus — TPU starting settings defaults TPU 230/40 vol 3 mm³/s 50-80 Simplify3D
All settings files Print cost

Tech specs

Type Industrial
Brand Sharebot
Сountry Italy
Print technology Fused Deposition Modeling (FDM / FFF)
Nozzle quantity 1
Print speed 150 cm3 / hour
LCD Screen Yes
Print Area 705x250x200
Bed Heated
Material ABS, PLA, PVA, Hips, Nylon, PC, Pet, Flex, Rubber
Material diameter 1.75
Host computer software Simplify3D
Input method USB, WiFi, Ethernet
Machine size 705x250x200
weight, kg 38 kg

Sharebot XXL Plus is an industrial 3D printer made by the Italian brand Sharebot. It uses Fused Deposition Modeling (FDM / FFF) technology and has a nozzle quantity of 1, with a print speed of 150 cm3/hour. The printer has an LCD screen, and can print with ABS, PLA, PVA, Hips, Nylon, PC, Pet, Flex, Rubber materials, with a material diameter of 1.75 mm. It is connected via USB, WiFi, Ethernet, and the host computer software is Simplify3D. The machine size is 705x250x200 cm, with a weight of 38 kg. For the best results, general slicer settings should be followed.

More