← Printer catalog · Slicer settings

Sharebot QWarm

Sharebot QWarm slicer settings

Recommended slicer settings for the Sharebot QWarm (Sharebot) 3D printer. Profiles cover PLA, PETG, ABS with starting nozzle/bed temperatures, fan, and speed guidance. Build volume 300х420х300. Fused Deposition Modeling (FDM / FFF). Common slicers: Simplify3D, SharebotPrint. Use these as a baseline and fine-tune for your filament brand and enclosure.

PLAPETGABS

Sharebot QWarm slicer settings

Starting temps and speeds for this machine. Generated defaults are a baseline — tune for your filament.

Profile Filament Temp Speed Fan Slicer
Sharebot QWarm — ABS starting settings defaults ABS 250/100 vol 11 mm³/s 0-20 Simplify3D
Sharebot QWarm — PETG starting settings defaults PETG 240/80 vol 12 mm³/s 30-50 Simplify3D
Sharebot QWarm — PLA starting settings defaults PLA 210/60 vol 15 mm³/s 100 Simplify3D
All settings files Print cost

Tech specs

Type Industrial
Brand Sharebot
Сountry Italy
Print technology Fused Deposition Modeling (FDM / FFF)
Nozzle quantity 1
LCD Screen Yes
Print Area 300х420х300
Bed Heated
Material Onyx
Material diameter 1.75
Host computer software Simplify3D, SharebotPrint
Input method wi-fi, usb, ethernet
Machine size 300х420х300
weight, kg 250 kg

Sharebot QWarm is a type of industrial FDM/FFF printer, produced by the Italian brand Sharebot and made with Onyx material. It has 1 nozzle, a heated build plate, a LCD screen, and supports Wi-Fi, USB and Ethernet. The machine size is 30х420х300, while the weight is 250 kg. It runs on Simplify3D and SharebotPrint, and features various slicer settings. These include a printing speed of 5-200 mm/s, an external layer width of 0.25-0.45 mm and an internal layer width of 0.2-0.4 mm. It also utilizes an external line width of 0.4-0.6 mm and an internal line width of 0.15-0.4 mm.

More