← Printer catalog · Slicer settings

Prusa i3

Prusa i3 (REPRAP) slicer settings

Recommended slicer settings for the Prusa i3 (REPRAP) (REPRAP) 3D printer. Profiles cover PLA, PETG, ABS with starting nozzle/bed temperatures, fan, and speed guidance. Build volume individual. Fused Deposition Modeling (FDM / FFF). Common slicers: Cura, Slic3r и др.. Use these as a baseline and fine-tune for your filament brand and enclosure.

PLAPETGABS

Prusa i3 (REPRAP) slicer settings

Starting temps and speeds for this machine. Generated defaults are a baseline — tune for your filament.

Profile Filament Temp Speed Fan Slicer
Prusa i3 — ABS starting settings defaults ABS 250/100 vol 11 mm³/s 0-20 Cura
Prusa i3 — ABS starting settings defaults ABS 250/100 90 mm/s 0-20 Cura
Prusa i3 — PETG starting settings defaults PETG 240/80 vol 12 mm³/s 30-50 Cura
Prusa i3 — PETG starting settings defaults PETG 240/80 90 mm/s 30-50 Cura
Prusa i3 — PLA starting settings defaults PLA 210/60 vol 15 mm³/s 100 Cura
Prusa i3 — PLA starting settings defaults PLA 210/60 90 mm/s 100 Cura
All settings files Print cost

Tech specs

Type Home
Brand REPRAP
Сountry Russia
Print technology Fused Deposition Modeling (FDM / FFF)
Nozzle quantity 1
Print speed individual
Print Area individual
Host computer software Cura, Slic3r и др.
Input method USB, Card Reader
Machine size individual
weight, kg individual kg

The tech specs and parameters for the RepRap 3D printer from Russia include: Type=Home, Brand=Reprap, Country=Russia, Print technology=Fused Deposition Modeling (FDM / FFF), Nozzle quantity=1, Print speed=Individual, LCD Screen=None, Print Area=Individual, Bed=None, Material=None, Material diameter=None, Host computer software=Cura, Slic3r, etc., Input method=USB, Card Reader, Machine size=Individual, weight=Individual kg. The general slicer settings for Prusa i3 can be found in a separate article.

More