3DSettings
← Printer catalog · Slicer settings
Sapphire Plus slicer settings
Recommended slicer settings for the Sapphire Plus (Shenzhen Twotrees Technology Co., Ltd.) 3D printer. Profiles cover PLA, PETG, ABS with starting nozzle/bed temperatures, fan, and speed guidance. Build volume 300х300х350. Fused Deposition Modeling (FDM / FFF). Common slicers: Cura, 3DPrinterOS, Repetier-Host и другие слайсеры. Use these as a baseline and fine-tune for your filament brand and enclosure.
PLAPETGABS
Sapphire Plus slicer settings
Starting temps and speeds for this machine. Generated defaults are a baseline — tune for your filament.
| Profile | Filament | Temp | Speed | Fan | Slicer |
|---|---|---|---|---|---|
| Sapphire Plus — ABS starting settings defaults | ABS | 250/100 | vol 11 mm³/s | 0-20 | Cura |
| Sapphire Plus — PETG starting settings defaults | PETG | 240/80 | vol 12 mm³/s | 30-50 | Cura |
| Sapphire Plus — PLA starting settings defaults | PLA | 210/60 | vol 15 mm³/s | 100 | Cura |
Tech specs
| Type | Home |
|---|---|
| Brand | Shenzhen Twotrees Technology Co., Ltd. |
| Сountry | China |
| Print technology | Fused Deposition Modeling (FDM / FFF) |
| Nozzle quantity | 1 |
| LCD Screen | Yes |
| Print Area | 300х300х350 |
| Bed | Heated |
| Material | RapidPrint Medical |
| Material diameter | 1.75 |
| Host computer software | Cura, 3DPrinterOS, Repetier-Host и другие слайсеры |
| Input method | usb, card reader |
| Machine size | 300х300х350 |
| weight, kg | 18 , 20 kg |