← Printer catalog · Slicer settings
Photo: Own work · CC BY-SA 4.0 · Wikimedia Commons
Recommended slicer settings for the Rostock (Reprap Austria) 3D printer. Profiles cover PLA, PETG, ABS with starting nozzle/bed temperatures, fan, and speed guidance. Fused Deposition Modeling (FDM / FFF). Use these as a baseline and fine-tune for your filament brand and enclosure.
PLAPETGABS
Starting temps and speeds for this machine. Generated defaults are a baseline — tune for your filament.
| Profile | Filament | Temp | Speed | Fan | Slicer |
|---|---|---|---|---|---|
| Rostock — ABS starting settings defaults | ABS | 250/100 | vol 11 mm³/s | 0-20 | Cura |
| Rostock — PETG starting settings defaults | PETG | 240/80 | vol 12 mm³/s | 30-50 | Cura |
| Rostock — PLA starting settings defaults | PLA | 210/60 | vol 15 mm³/s | 100 | Cura |
| Type | Home |
|---|---|
| Brand | Reprap Austria |
| Сountry | Austria |
| Print technology | Fused Deposition Modeling (FDM / FFF) |
| Nozzle quantity | 1 |
| Bed | Heated |
| Material | ABS, PLA, Petg |
| Material diameter | 1.75 |
| Input method | USB |
| weight, kg | kg |
The Tech Spec and Parameters for the Reprap Austria Rostock 3D Printer consists of a type, brand, country, print technology (FDM / FFF), nozzle quantity (1), heated bed, materials (ABS, PLA, Petg), material diameter (1.75), USB input, and machine size & weight ( kg). The general slicer settings include parameters related to printing layers, fill pattern, printing speed, and temperature.
3DSettings