← Printer catalog · Slicer settings

QIDI Tech 1

QIDI Tech 1 slicer settings

Recommended slicer settings for the QIDI Tech 1 (QIDI Technology) 3D printer. Profiles cover PLA, PETG, ABS with starting nozzle/bed temperatures, fan, and speed guidance. Build volume 230х150х150. Fused Deposition Modeling (FDM / FFF). Common slicers: QIDI Print на основе Cura и другие слайсеры. Use these as a baseline and fine-tune for your filament brand and enclosure.

PLAPETGABS

QIDI Tech 1 slicer settings

Starting temps and speeds for this machine. Generated defaults are a baseline — tune for your filament.

Profile Filament Temp Speed Fan Slicer
QIDI Tech 1 — ABS starting settings defaults ABS 250/100 vol 11 mm³/s 0-20 QIDI Print на основе Cura и другие слайсеры
QIDI Tech 1 — PETG starting settings defaults PETG 240/80 vol 12 mm³/s 30-50 QIDI Print на основе Cura и другие слайсеры
QIDI Tech 1 — PLA starting settings defaults PLA 210/60 vol 15 mm³/s 100 QIDI Print на основе Cura и другие слайсеры
All settings files Print cost

Tech specs

Type Home
Brand QIDI Technology
Сountry China
Print technology Fused Deposition Modeling (FDM / FFF)
Nozzle quantity 2
LCD Screen Yes
Print Area 230х150х150
Bed Heated
Material ABS, PLA, Petg
Material diameter 1.75
Host computer software QIDI Print на основе Cura и другие слайсеры
Input method usb, card reader
Machine size 230х150х150
weight, kg 25 kg

QIDI Tech 1 from QIDI Technology is a home 3D printer produced in China which uses Fused Deposition Modeling (FDM / FFF) technology. It has two nozzles and an LCD screen. Its build area is 230x150x150mm and the bed is heated for temperatures up to 110°C. It prints with ABS, PLA, and Petg materials with the diameter of 1.75mm. The machine size is 230x150x150mm and weighs 25kg. The input method is either via USB or card reader and the host computer software is QIDI Print which is based on Cura and other slicers. General slicer settings for the Tech 1 are also included in its instructions.

More