3DSettings
General slicer settings for Prusa Mendel 2 are: Layer height 0.08 – 0.12 mm, Line width 0.15 – 0.70 mm, Flow Rate 77 – 125 mm, Retraction length 3 – 6 mm and Speed 40 – 80 mm/s.
← Printer catalog · Slicer settings
Prusa Mendel 2 slicer settings
Recommended slicer settings for the Prusa Mendel 2 (NWRepRap) 3D printer. Profiles cover PLA, PETG, ABS, NYLON, HIPS with starting nozzle/bed temperatures, fan, and speed guidance. Build volume 178х178х127. Fused Deposition Modeling (FDM / FFF). Use these as a baseline and fine-tune for your filament brand and enclosure.
PLAPETGABSNYLONHIPS
Prusa Mendel 2 slicer settings
Starting temps and speeds for this machine. Generated defaults are a baseline — tune for your filament.
| Profile | Filament | Temp | Speed | Fan | Slicer |
|---|---|---|---|---|---|
| Prusa Mendel 2 — ABS starting settings defaults | ABS | 250/100 | vol 11 mm³/s | 0-20 | Cura |
| Prusa Mendel 2 — HIPS starting settings defaults | HIPS | 240/100 | vol 10 mm³/s | 20-40 | Cura |
| Prusa Mendel 2 — NYLON starting settings defaults | NYLON | 260/90 | vol 8 mm³/s | 0-30 | Cura |
| Prusa Mendel 2 — PETG starting settings defaults | PETG | 240/80 | vol 12 mm³/s | 30-50 | Cura |
| Prusa Mendel 2 — PLA starting settings defaults | PLA | 210/60 | vol 15 mm³/s | 100 | Cura |
Tech specs
| Type | Home |
|---|---|
| Brand | NWRepRap |
| Сountry | USA |
| Print technology | Fused Deposition Modeling (FDM / FFF) |
| Nozzle quantity | 1 |
| Print Area | 178х178х127 |
| Material | ABS, PLA, Hips, Nylon, Petg |
| Material diameter | 3 |
| Machine size | 178х178х127 |
| weight, kg | 10 kg |