← Printer catalog · Slicer settings
Recommended slicer settings for the Prusa 6 “i3 (MakerFarm) 3D printer. Profiles cover PLA, PETG, ABS with starting nozzle/bed temperatures, fan, and speed guidance. Build volume 152х152х152. Fused Deposition Modeling (FDM / FFF). Use these as a baseline and fine-tune for your filament brand and enclosure.
PLAPETGABS
Starting temps and speeds for this machine. Generated defaults are a baseline — tune for your filament.
| Profile | Filament | Temp | Speed | Fan | Slicer |
|---|---|---|---|---|---|
| Prusa 6 "i3 — ABS starting settings defaults | ABS | 250/100 | vol 11 mm³/s | 0-20 | Cura |
| Prusa 6 "i3 — PETG starting settings defaults | PETG | 240/80 | vol 12 mm³/s | 30-50 | Cura |
| Prusa 6 "i3 — PLA starting settings defaults | PLA | 210/60 | vol 15 mm³/s | 100 | Cura |
| Type | Home |
|---|---|
| Brand | MakerFarm |
| Сountry | USA |
| Print technology | Fused Deposition Modeling (FDM / FFF) |
| Nozzle quantity | 1 |
| Print Area | 152х152х152 |
| Material | B9R Black” |
| Material diameter | 3 |
| Machine size | 152х152х152 |
| weight, kg | kg |
The MakerFarm Prusa I3 6″ printer is a home 3D printer type from the MakerFarm brand, USA. It uses Fused Deposition Modeling (FDM/FFF) and has one nozzle. Its maximum print area is 152 x 152 x 152mm and its material is B9R Black. Its material diameter is 3mm. The machine size is 152 x 152 x 152mm and it weighs kg. The host computer software and input method is not specified. General slicer settings for Prusa 6″ i3 are not mentioned.
3DSettings