← Printer catalog · Slicer settings
Recommended slicer settings for the Protos v2 (German RepRap GmbH) 3D printer. Profiles cover PLA, PETG, ABS with starting nozzle/bed temperatures, fan, and speed guidance. Build volume 230х230х125. Fused Deposition Modeling (FDM / FFF). Use these as a baseline and fine-tune for your filament brand and enclosure.
PLAPETGABS
Starting temps and speeds for this machine. Generated defaults are a baseline — tune for your filament.
| Profile | Filament | Temp | Speed | Fan | Slicer |
|---|---|---|---|---|---|
| Protos v2 — ABS starting settings defaults | ABS | 250/100 | 350 mm/s | 0-20 | Cura |
| Protos v2 — PETG starting settings defaults | PETG | 240/80 | 350 mm/s | 30-50 | Cura |
| Protos v2 — PLA starting settings defaults | PLA | 210/60 | 350 mm/s | 100 | Cura |
| Type | Home |
|---|---|
| Brand | German RepRap GmbH |
| Сountry | Germany |
| Print technology | Fused Deposition Modeling (FDM / FFF) |
| Nozzle quantity | 1 |
| Print speed | 350 mm / s |
| LCD Screen | Yes |
| Print Area | 230х230х125 |
| Bed | Heated |
| Material | Thermoplastic powders |
| Material diameter | 3 |
| Input method | USB, Card Reader |
| Machine size | 230х230х125 |
| weight, kg | 10.5 kg |
This article describes the tech specs and parameters for the German RepRap GmbH Protos v2 Home 3D printer, including type, brand, country of origin, print technology and nozzle quantity, print speed, LCD screen, print area, heated bed and material, material diameter, input method, machine size and weight. General slicer settings for the Protos v2 3D printer are also provided.
3DSettings