3DSettings
This tech spec and parameters describes a 3DQuality Home printer from Russia which uses Fused Deposition Modeling (FDM / FFF) technology and has a nozzle quantity of one, a print speed of 150 mm / s, a heated bed, a print area of 150х150х150 and a material diameter of 1.75. It supports ABS, PLA, Nylon, Petg, and Wood material and input is through USB. The machine size is 150х150х150 and the weight is kg. The general slicer settings for Prism Uni are also provided.
← Printer catalog · Slicer settings
Prism Uni slicer settings
Recommended slicer settings for the Prism Uni (3DQuality) 3D printer. Profiles cover PLA, PETG, ABS, NYLON, WOOD with starting nozzle/bed temperatures, fan, and speed guidance. Build volume 150х150х150. Fused Deposition Modeling (FDM / FFF). Use these as a baseline and fine-tune for your filament brand and enclosure.
PLAPETGABSNYLONWOOD
Prism Uni slicer settings
Starting temps and speeds for this machine. Generated defaults are a baseline — tune for your filament.
| Profile | Filament | Temp | Speed | Fan | Slicer |
|---|---|---|---|---|---|
| Prism Uni — ABS starting settings defaults | ABS | 250/100 | 150 mm/s | 0-20 | Cura |
| Prism Uni — NYLON starting settings defaults | NYLON | 260/90 | 150 mm/s | 0-30 | Cura |
| Prism Uni — PETG starting settings defaults | PETG | 240/80 | 150 mm/s | 30-50 | Cura |
| Prism Uni — PLA starting settings defaults | PLA | 210/60 | 150 mm/s | 100 | Cura |
| Prism Uni — WOOD starting settings defaults | WOOD | 200/60 | 150 mm/s | 100 | Cura |
Tech specs
| Type | Home |
|---|---|
| Brand | 3DQuality |
| Сountry | Russia |
| Print technology | Fused Deposition Modeling (FDM / FFF) |
| Nozzle quantity | 1 |
| Print speed | 150 mm / s |
| Print Area | 150х150х150 |
| Bed | Heated |
| Material | ABS, PLA, Nylon, Petg, Wood |
| Material diameter | 1.75 |
| Input method | USB |
| Machine size | 150х150х150 |
| weight, kg | kg |