← Printer catalog · Slicer settings

Prism Home v2

Prism Home v2 slicer settings

Recommended slicer settings for the Prism Home v2 (3DQuality) 3D printer. Profiles cover PLA, PETG, ABS, HIPS with starting nozzle/bed temperatures, fan, and speed guidance. Build volume 400х400х560. Fused Deposition Modeling (FDM / FFF). Common slicers: Cura. Use these as a baseline and fine-tune for your filament brand and enclosure.

PLAPETGABSHIPS

Prism Home v2 slicer settings

Starting temps and speeds for this machine. Generated defaults are a baseline — tune for your filament.

Profile Filament Temp Speed Fan Slicer
Prism Home v2 — ABS starting settings defaults ABS 250/100 150 mm/s 0-20 Cura
Prism Home v2 — HIPS starting settings defaults HIPS 240/100 150 mm/s 20-40 Cura
Prism Home v2 — PETG starting settings defaults PETG 240/80 150 mm/s 30-50 Cura
Prism Home v2 — PLA starting settings defaults PLA 210/60 150 mm/s 100 Cura
All settings files Print cost

Tech specs

Type Home
Brand 3DQuality
Сountry Russia
Print technology Fused Deposition Modeling (FDM / FFF)
Nozzle quantity 1
Print speed 150 mm / C
LCD Screen Yes
Print Area 400х400х560
Bed Heated
Material ABS, PLA, Hips, Petg
Material diameter 1.75
Host computer software Cura
Input method USB, Card Reader, WiFi
Machine size 400х400х560
weight, kg kg

This tech spec and parameters provides information about the 3DQuality Home printer. It uses fused deposition modeling (FDM / FFF) as its print technology, has a single nozzle, a print speed of 150 mm/C, and a LCD Screen. The heated print bed has a maximum print area of 400x400x560 and supports ABS, PLA, HIPS, and PETG filaments with a diameter of 1.75mm. It is compatible with Cura as its host computer software and can be connected via USB, memory card reader, or WiFi. The machine size is 400x400x560, with a weight of 0 kg. General slicer settings are available for the Prism Home v2.

More