← Printer catalog · Slicer settings

Printrbot Simple Maker's Kit

Printrbot Simple Maker’s Kit slicer settings

Recommended slicer settings for the Printrbot Simple Maker’s Kit (Printrbot, Inc) 3D printer. Profiles cover PLA, PETG, ABS with starting nozzle/bed temperatures, fan, and speed guidance. Build volume 100х100х100. Fused Deposition Modeling (FDM / FFF). Use these as a baseline and fine-tune for your filament brand and enclosure.

PLAPETGABS

Printrbot Simple Maker’s Kit slicer settings

Starting temps and speeds for this machine. Generated defaults are a baseline — tune for your filament.

Profile Filament Temp Speed Fan Slicer
Printrbot Simple Maker's Kit — ABS starting settings defaults ABS 250/100 65 mm/s 0-20 Cura
Printrbot Simple Maker's Kit — PETG starting settings defaults PETG 240/80 65 mm/s 30-50 Cura
Printrbot Simple Maker's Kit — PLA starting settings defaults PLA 210/60 65 mm/s 100 Cura
All settings files Print cost

Tech specs

Type Home
Brand Printrbot, Inc
Сountry USA
Print technology Fused Deposition Modeling (FDM / FFF)
Nozzle quantity 1
Print speed 65 mm / s
Print Area 100х100х100
Material Metal powders
Material diameter 1.75
Machine size 100х100х100
weight, kg 2.4 kg

This tech spec and parameters table summarises information about the Printrbot Simple Maker’s Kit. It has been manufactured by Printrbot, Inc. in the USA and utilizes Fused Deposition Modeling (FDM / FFF). It has a single nozzle and can reach speeds of 65 mm / s. The print area is 100х100х100 and it has a weight of 2.4 kg. It is designed to use metal powders with a material diameter of 1.75. There is no LCD screen, bed and host computer software, and the input method is unspecified. The machine size is 100х100х100. General slicer settings are also available.

More