3DSettings
PrintBox3D 120 is a home 3D printer from Russia. It has a 1-nozzle Fused Deposition Modeling (FDM/FFF) with a print speed of 25 cm3 / hour and a print area of 120x120x120mm. It is heated bed and has a built-in LCD, with a material diameter of 1.75 and a weight of 8kg. It uses PLA as the material and is connected to the host computer to a USB or a card reader. Its general slicer settings are layer height 0.2mm, infill 10%, and temperature 215-225°C.
← Printer catalog · Slicer settings
PrintBox3D 120 slicer settings
Recommended slicer settings for the PrintBox3D 120 (PrintBox3D) 3D printer. Profiles cover PLA with starting nozzle/bed temperatures, fan, and speed guidance. Build volume 120х120х120. Fused Deposition Modeling (FDM / FFF). Use these as a baseline and fine-tune for your filament brand and enclosure.
PLA
PrintBox3D 120 slicer settings
Starting temps and speeds for this machine. Generated defaults are a baseline — tune for your filament.
| Profile | Filament | Temp | Speed | Fan | Slicer |
|---|---|---|---|---|---|
| PrintBox3D 120 — PLA starting settings defaults | PLA | 210/60 | vol 15 mm³/s | 100 | Cura |
Tech specs
| Type | Home |
|---|---|
| Brand | PrintBox3D |
| Сountry | Russia |
| Print technology | Fused Deposition Modeling (FDM / FFF) |
| Nozzle quantity | 1 |
| Print speed | 25 cm3 / hour |
| Print Area | 120х120х120 |
| Bed | Heated |
| Material | PLA |
| Material diameter | 1.75 |
| Input method | USB, Card Reader |
| Machine size | 120х120х120 |
| weight, kg | 8 kg |