← Printer catalog · Slicer settings
Recommended slicer settings for the Piecemaker v1 (PieceMaker Technologies) 3D printer. Profiles cover PLA, PETG, ABS with starting nozzle/bed temperatures, fan, and speed guidance. Build volume 154х172х144. Fused Deposition Modeling (FDM / FFF). Common slicers: Piece-It!. Use these as a baseline and fine-tune for your filament brand and enclosure.
PLAPETGABS
Starting temps and speeds for this machine. Generated defaults are a baseline — tune for your filament.
| Profile | Filament | Temp | Speed | Fan | Slicer |
|---|---|---|---|---|---|
| Piecemaker v1 — ABS starting settings defaults | ABS | 250/100 | vol 11 mm³/s | 0-20 | Piece-It! |
| Piecemaker v1 — PETG starting settings defaults | PETG | 240/80 | vol 12 mm³/s | 30-50 | Piece-It! |
| Piecemaker v1 — PLA starting settings defaults | PLA | 210/60 | vol 15 mm³/s | 100 | Piece-It! |
| Type | Home |
|---|---|
| Brand | PieceMaker Technologies |
| Сountry | USA |
| Print technology | Fused Deposition Modeling (FDM / FFF) |
| Nozzle quantity | 2 |
| Print Area | 154х172х144 |
| Bed | Heated |
| Material | Visijet M3 Hi-Cast |
| Material diameter | 3 |
| Host computer software | Piece-It! |
| Input method | USB, Card Reader, WiFi |
| Machine size | 154х172х144 |
| weight, kg | 11.3 kg |
This article summarizes the tech specs and parameters for the PieceMaker Technologies home 3D printer. It is made in the USA and has a Fused Deposition Modeling system with 2 nozzles, a heated bed and a host computer software of Piece-It! The print area is 154х172х144, it weighs 11.3 kg, has a material diameter of 3 and the input method can be USB, Card Reader or WiFi.
3DSettings