← Printer catalog · Slicer settings

Picaso 3D Builder

Picaso 3D Builder slicer settings

Recommended slicer settings for the Picaso 3D Builder (PICASO 3D) 3D printer. Profiles cover PLA, PETG, ABS with starting nozzle/bed temperatures, fan, and speed guidance. Build volume 200х200х200. Fused Deposition Modeling (FDM / FFF). Common slicers: PICASO POLYGON FOR BUILDER. Use these as a baseline and fine-tune for your filament brand and enclosure.

PLAPETGABS

Picaso 3D Builder slicer settings

Starting temps and speeds for this machine. Generated defaults are a baseline — tune for your filament.

Profile Filament Temp Speed Fan Slicer
Picaso 3D Builder — ABS starting settings defaults ABS 250/100 vol 11 mm³/s 0-20 PICASO POLYGON FOR BUILDER
Picaso 3D Builder — PETG starting settings defaults PETG 240/80 vol 12 mm³/s 30-50 PICASO POLYGON FOR BUILDER
Picaso 3D Builder — PLA starting settings defaults PLA 210/60 vol 15 mm³/s 100 PICASO POLYGON FOR BUILDER
All settings files Print cost

Tech specs

Type Home
Brand PICASO 3D
Сountry Russia
Print technology Fused Deposition Modeling (FDM / FFF)
Nozzle quantity 1
Print speed 25 cm3 / hour
Print Area 200х200х200
Bed Without heated
Material Photopolymer resin
Material diameter 1.75
Host computer software PICASO POLYGON FOR BUILDER
Machine size 200х200х200
weight, kg 6.5 kg

The Picaso 3D Builder is a home 3D Printer made in Russia by the brand PICASO. It is a Fused Deposition Modeling (FDM/FFF) 3D printer with a single nozzle and a print speed of 25 cm3/hour. It has a print area of 200х200х200, a non heated bed, and uses photopolymer resin with a material diameter of 1.75. It comes with the PICASO POLYGON FOR BUILDER host computer software, and has a machine size of 200х200х200 and weighs 6.5 kg. General slicer settings for the Picaso 3D Builder are available online for users.

More