3DSettings
The Tech Spec and Parameters for the Pangu 3D Printer from RDMCU is a Home FDM/FFF printer manufactured in China. It has 1 nozzle, a heated bed, and prints with photopolymer resin with a diameter of 1.75. Its input method is USB and has a weight of 10 kg. General slicer settings for Pangu are also available for use.
← Printer catalog · Slicer settings
Pangu slicer settings
Recommended slicer settings for the Pangu (RDMCU) 3D printer. Profiles cover PLA, PETG, ABS with starting nozzle/bed temperatures, fan, and speed guidance. Fused Deposition Modeling (FDM / FFF). Use these as a baseline and fine-tune for your filament brand and enclosure.
PLAPETGABS
Pangu slicer settings
Starting temps and speeds for this machine. Generated defaults are a baseline — tune for your filament.
| Profile | Filament | Temp | Speed | Fan | Slicer |
|---|---|---|---|---|---|
| Pangu — ABS starting settings defaults | ABS | 250/100 | vol 11 mm³/s | 0-20 | Cura |
| Pangu — PETG starting settings defaults | PETG | 240/80 | vol 12 mm³/s | 30-50 | Cura |
| Pangu — PLA starting settings defaults | PLA | 210/60 | vol 15 mm³/s | 100 | Cura |
Tech specs
| Type | Home |
|---|---|
| Brand | RDMCU |
| Сountry | China |
| Print technology | Fused Deposition Modeling (FDM / FFF) |
| Nozzle quantity | 1 |
| Bed | Heated |
| Material | Photopolymer resin |
| Material diameter | 1.75 |
| Input method | USB |
| weight, kg | 10 kg |