3DSettings
The Mootooh FDM/FFF 3D printer is manufactured by Shenzhen Mootooh Engineering Co., Ltd. in China. It has a single nozzle with a diameter of 1.75, a print area of 140x140x115, and a machine size of 140x140x115. It is not equipped with a heated bed and has an input method of USB. It has a weight of 65 kg. Slicer settings may vary depending on the model of Mootooh 3D printer.
← Printer catalog · Slicer settings
Mootooh slicer settings
Recommended slicer settings for the Mootooh (Shenzhen Mootooh Engineering Co., Ltd.) 3D printer. Profiles cover PLA, PETG, ABS with starting nozzle/bed temperatures, fan, and speed guidance. Build volume 140х140х115. Fused Deposition Modeling (FDM / FFF). Use these as a baseline and fine-tune for your filament brand and enclosure.
PLAPETGABS
Mootooh slicer settings
Starting temps and speeds for this machine. Generated defaults are a baseline — tune for your filament.
| Profile | Filament | Temp | Speed | Fan | Slicer |
|---|---|---|---|---|---|
| Mootooh — ABS starting settings defaults | ABS | 250/100 | vol 11 mm³/s | 0-20 | Cura |
| Mootooh — PETG starting settings defaults | PETG | 240/80 | vol 12 mm³/s | 30-50 | Cura |
| Mootooh — PLA starting settings defaults | PLA | 210/60 | vol 15 mm³/s | 100 | Cura |
Tech specs
| Type | Home |
|---|---|
| Brand | Shenzhen Mootooh Engineering Co., Ltd. |
| Сountry | China |
| Print technology | Fused Deposition Modeling (FDM / FFF) |
| Nozzle quantity | 1 |
| Print Area | 140х140х115 |
| Bed | Without heated |
| Material diameter | 1.75 |
| Input method | USB |
| Machine size | 140х140х115 |
| weight, kg | 65 kg |