← Printer catalog · Slicer settings

Markforged X5

Markforged X5 slicer settings

Recommended slicer settings for the Markforged X5 (MarkForged) 3D printer. Profiles cover PLA with starting nozzle/bed temperatures, fan, and speed guidance. Build volume 330x270x200. Fused Deposition Modeling (FDM / FFF). Common slicers: Markforged Eiger. Use these as a baseline and fine-tune for your filament brand and enclosure.

PLA

Markforged X5 slicer settings

Starting temps and speeds for this machine. Generated defaults are a baseline — tune for your filament.

Profile Filament Temp Speed Fan Slicer
Markforged X5 — PLA starting settings defaults PLA 210/60 vol 15 mm³/s 100 Markforged Eiger
All settings files Print cost

Tech specs

Type Commercial
Brand MarkForged
Сountry USA
Print technology Fused Deposition Modeling (FDM / FFF)
Nozzle quantity 1
Print Area 330x270x200
Bed Heated
Material PLA, Laywoo-D3, Rubber
Material diameter 1.75
Host computer software Markforged Eiger
Input method USB, WiFi
Machine size 330x270x200
weight, kg 68 kg

This article provides an overview of the technical specs and parameters of the Markforged X5 3D printer. It has a commercial type, is made in USA and uses Fused Deposition Modeling (FDM / FFF). There is only one nozzle in this printer and no LCD screen. The maximum print area of the X5 is 330x270x200 mm and it has a heated bed for printing. It is compatible with PLA, Laywoo-D3, and Rubber materials with a diameter of 1.75 mm. The software used for this model is Markforged Eiger and it can be connected to a host computer using either USB or WiFi. The dimensions of the printer are 330x270x200 mm and it weighs 68 kg.

More