3DSettings
This 3D printer is a “Home” type, made in Russia by the brand “Magnum”. It uses Fused Deposition Modeling (FDM / FFF) technology, has one nozzle, and prints at 35 cm3/hour. It has an LCD screen, a heated bed, and accepts 1.75mm ABS and PLA filament. The input methods are USB and Card Reader and the machine size is 260x170x170 and it weighs 12 kgs. The host computer software is RepetierHost and Slic3r for general slicer settings.
← Printer catalog · Slicer settings
Magnum Creative 2 Pro slicer settings
Recommended slicer settings for the Magnum Creative 2 Pro (Magnum) 3D printer. Profiles cover PLA, ABS with starting nozzle/bed temperatures, fan, and speed guidance. Build volume 260х170х170. Fused Deposition Modeling (FDM / FFF). Common slicers: RepetierHost, Slic3r. Use these as a baseline and fine-tune for your filament brand and enclosure.
PLAABS
Magnum Creative 2 Pro slicer settings
Starting temps and speeds for this machine. Generated defaults are a baseline — tune for your filament.
| Profile | Filament | Temp | Speed | Fan | Slicer |
|---|---|---|---|---|---|
| Magnum Creative 2 Pro — ABS starting settings defaults | ABS | 250/100 | vol 11 mm³/s | 0-20 | RepetierHost |
| Magnum Creative 2 Pro — PLA starting settings defaults | PLA | 210/60 | vol 15 mm³/s | 100 | RepetierHost |
Tech specs
| Type | Home |
|---|---|
| Brand | Magnum |
| Сountry | Russia |
| Print technology | Fused Deposition Modeling (FDM / FFF) |
| Nozzle quantity | 1 |
| Print speed | 35 cm3 / hour |
| LCD Screen | Yes |
| Print Area | 260х170х170 |
| Bed | Heated |
| Material | ABS, PLA |
| Material diameter | 1.75 |
| Host computer software | RepetierHost, Slic3r |
| Input method | USB, Card Reader |
| Machine size | 260х170х170 |
| weight, kg | 12 kg |