← Printer catalog · Slicer settings

Magnum Creative 2 SW

Magnum Creative 2 SW slicer settings

Recommended slicer settings for the Magnum Creative 2 SW (Magnum) 3D printer. Profiles cover PLA, PETG, ABS with starting nozzle/bed temperatures, fan, and speed guidance. Build volume 235х175х180. Fused Deposition Modeling (FDM / FFF). Common slicers: Repetier Host, Cura, Slic3r. Use these as a baseline and fine-tune for your filament brand and enclosure.

PLAPETGABS

Magnum Creative 2 SW slicer settings

Starting temps and speeds for this machine. Generated defaults are a baseline — tune for your filament.

Profile Filament Temp Speed Fan Slicer
Magnum Creative 2 SW — ABS starting settings defaults ABS 250/100 100 mm/s 0-20 Repetier Host
Magnum Creative 2 SW — PETG starting settings defaults PETG 240/80 100 mm/s 30-50 Repetier Host
Magnum Creative 2 SW — PLA starting settings defaults PLA 210/60 100 mm/s 100 Repetier Host
All settings files Print cost

Tech specs

Type Home
Brand Magnum
Сountry Russia
Print technology Fused Deposition Modeling (FDM / FFF)
Nozzle quantity 2
Print speed up to 100 mm / s
LCD Screen Yes
Print Area 235х175х180
Bed Heated
Material B9R Emerald
Material diameter 1.75
Host computer software Repetier Host, Cura, Slic3r
Input method USB, Card Reader
Machine size 235х175х180
weight, kg 15 kg

This article gives information about the technical specifications and parameters for the Magnum Creative 2 SW home machine. It is a Fused Deposition Modeling (FFF/FDM) printer made in Russia, with two nozzles. It has a print speed of up to 100 mm/s, an LCD screen, a heated bed, and a print area of 235х175х180mm. It uses the B9R Emerald material with a diameter of 1.75mm. The host computer software used is Repetier Host, Cura, and Slic3r. It can be connected via USB or a Card Reader, and it has a size of 235х175х180mm and a weight of 15kg. It also comes with general slicer settings for Magnum Creative 2 SW.

More