3DSettings
general-sithis Magnus Creative 2 printer is a home device made in Russia with a Fused Deposition Modeling (FDM / FFF) type of print technology. It has 1 nozzle and print speed up to 35 cm3/hour. It has a print area of 260x170x170 and a weight of 12 kg. It accepts materials with a diameter of 1.75 and is compatible with RepetierHost and Slic3r as host computer software. It has an input method of USB and card reader. General slicer settings for the printer are listed for Photopolymer resin.
← Printer catalog · Slicer settings
Magnum Creative 2 PLA slicer settings
Recommended slicer settings for the Magnum Creative 2 PLA (Magnum) 3D printer. Profiles cover PLA, PETG, ABS with starting nozzle/bed temperatures, fan, and speed guidance. Build volume 260х170х170. Fused Deposition Modeling (FDM / FFF). Common slicers: RepetierHost, Slic3r. Use these as a baseline and fine-tune for your filament brand and enclosure.
PLAPETGABS
Magnum Creative 2 PLA slicer settings
Starting temps and speeds for this machine. Generated defaults are a baseline — tune for your filament.
| Profile | Filament | Temp | Speed | Fan | Slicer |
|---|---|---|---|---|---|
| Magnum Creative 2 PLA — ABS starting settings defaults | ABS | 250/100 | vol 11 mm³/s | 0-20 | RepetierHost |
| Magnum Creative 2 PLA — PETG starting settings defaults | PETG | 240/80 | vol 12 mm³/s | 30-50 | RepetierHost |
| Magnum Creative 2 PLA — PLA starting settings defaults | PLA | 210/60 | vol 15 mm³/s | 100 | RepetierHost |
Tech specs
| Type | Home |
|---|---|
| Brand | Magnum |
| Сountry | Russia |
| Print technology | Fused Deposition Modeling (FDM / FFF) |
| Nozzle quantity | 1 |
| Print speed | 35 cm3 / hour |
| Print Area | 260х170х170 |
| Bed | Without heated |
| Material | Photopolymer resin |
| Material diameter | 1.75 |
| Host computer software | RepetierHost, Slic3r |
| Input method | USB, Card Reader |
| Machine size | 260х170х170 |
| weight, kg | 12 kg |