3DSettings
Romscraj, a home 3D printer from Singapore, has a Fused Deposition Modeling (FDM / FFF) system with a nozzle quantity of 1 and a heated bed. It has a maximum build size of 202х162х180 and a weight of 10 kg. Materials that are suited for the printer are Sand and PS-powder and it works with a host computer software and an input method. The general slicer settings for MOB includes nozzle temperature, bed temperature, printing speed, infill speed and layer height.
← Printer catalog · Slicer settings
MOB slicer settings
Recommended slicer settings for the MOB (Romscraj) 3D printer. Profiles cover PLA, PETG, ABS with starting nozzle/bed temperatures, fan, and speed guidance. Build volume 202х162х180. Fused Deposition Modeling (FDM / FFF). Use these as a baseline and fine-tune for your filament brand and enclosure.
PLAPETGABS
MOB slicer settings
Starting temps and speeds for this machine. Generated defaults are a baseline — tune for your filament.
| Profile | Filament | Temp | Speed | Fan | Slicer |
|---|---|---|---|---|---|
| MOB — ABS starting settings defaults | ABS | 250/100 | vol 11 mm³/s | 0-20 | Cura |
| MOB — PETG starting settings defaults | PETG | 240/80 | vol 12 mm³/s | 30-50 | Cura |
| MOB — PLA starting settings defaults | PLA | 210/60 | vol 15 mm³/s | 100 | Cura |
Tech specs
| Type | Home |
|---|---|
| Brand | Romscraj |
| Сountry | Singapore |
| Print technology | Fused Deposition Modeling (FDM / FFF) |
| Nozzle quantity | 1 |
| Print Area | 202х162х180 |
| Bed | Heated |
| Material | Sand, PS-powder |
| Machine size | 202х162х180 |
| weight, kg | 10 kg |