3DSettings
Hyrel 3D Journeyman is a home 3D printer made in the USA. It uses Fused Deposition Modeling (FDM / FFF) technology with two nozzles, has a heated bed and is capable of 3mm ABS Plus material printing. It has an LCD screen, a print area of 200x200x200, is connected via USB or Serial, and weighs kg. The slicer settings for the Journeyman are not yet available.
← Printer catalog · Slicer settings
Journeyman slicer settings
Recommended slicer settings for the Journeyman (Hyrel 3D) 3D printer. Profiles cover ABS with starting nozzle/bed temperatures, fan, and speed guidance. Build volume 200х200х200. Fused Deposition Modeling (FDM / FFF). Use these as a baseline and fine-tune for your filament brand and enclosure.
ABS
Journeyman slicer settings
Starting temps and speeds for this machine. Generated defaults are a baseline — tune for your filament.
| Profile | Filament | Temp | Speed | Fan | Slicer |
|---|---|---|---|---|---|
| Journeyman — ABS starting settings defaults | ABS | 250/100 | vol 11 mm³/s | 0-20 | Cura |
Tech specs
| Type | Home |
|---|---|
| Brand | Hyrel 3D |
| Сountry | USA |
| Print technology | Fused Deposition Modeling (FDM / FFF) |
| Nozzle quantity | 2 |
| LCD Screen | Yes |
| Print Area | 200х200х200 |
| Bed | Heated |
| Material | ABS Plus |
| Material diameter | 3 |
| Input method | USB, Serial |
| Machine size | 200х200х200 |
| weight, kg | kg |