3DSettings
The Hyrel 3D is a home model 3D printer made by Hyrel 3D, USA. It uses Fused Deposition Modeling (FDM/FFF) technology and is equipped with a single nozzle, a 200x200x200 print area, a heated bed and a photopolymer resin material of diameter 3. It supports input methods of USB and Serial. The machine size is 200x200x200 and it weighs kg. The user must separately install a compatible host computer software to operate the printer. Slicer settings for hobbyist users include filament selection, layer height adjustment, infill, print speed, etc.
← Printer catalog · Slicer settings
Hobbyist slicer settings
Recommended slicer settings for the Hobbyist (Hyrel 3D) 3D printer. Profiles cover PLA, PETG, ABS with starting nozzle/bed temperatures, fan, and speed guidance. Build volume 200х200х200. Fused Deposition Modeling (FDM / FFF). Use these as a baseline and fine-tune for your filament brand and enclosure.
PLAPETGABS
Hobbyist slicer settings
Starting temps and speeds for this machine. Generated defaults are a baseline — tune for your filament.
| Profile | Filament | Temp | Speed | Fan | Slicer |
|---|---|---|---|---|---|
| Hobbyist — ABS starting settings defaults | ABS | 250/100 | vol 11 mm³/s | 0-20 | Cura |
| Hobbyist — PETG starting settings defaults | PETG | 240/80 | vol 12 mm³/s | 30-50 | Cura |
| Hobbyist — PLA starting settings defaults | PLA | 210/60 | vol 15 mm³/s | 100 | Cura |
Tech specs
| Type | Home |
|---|---|
| Brand | Hyrel 3D |
| Сountry | USA |
| Print technology | Fused Deposition Modeling (FDM / FFF) |
| Nozzle quantity | 1 |
| Print Area | 200х200х200 |
| Bed | Heated |
| Material | Photopolymer resin |
| Material diameter | 3 |
| Input method | USB, Serial |
| Machine size | 200х200х200 |
| weight, kg | kg |