3DSettings
BEETHEFIRST is a home-use 3D printer made in Portugal. It uses Fused Deposition Modeling (FDM/FFF) technology, has two nozzles, LCD Screen, heated bed, supports PLA filament with a diameter of 1.75mm and can print an area of 185x200x190mm. Host computer software includes Cura/Slic3r/Repetier/Simplify 3D/Pronterface and input method is USB, Card Reader. It weighs 8kg and has a machine size of 185x200x190mm. General slicer settings for BEETHEFIRST can be found in their manual.
← Printer catalog · Slicer settings
Hellobeeprusa slicer settings
Recommended slicer settings for the Hellobeeprusa (BEETHEFIRST) 3D printer. Profiles cover PLA with starting nozzle/bed temperatures, fan, and speed guidance. Build volume 185x200x190. Fused Deposition Modeling (FDM / FFF). Common slicers: Cura/Slic3r/Repetier/Simplify 3D/Pronterface. Use these as a baseline and fine-tune for your filament brand and enclosure.
PLA
Hellobeeprusa slicer settings
Starting temps and speeds for this machine. Generated defaults are a baseline — tune for your filament.
| Profile | Filament | Temp | Speed | Fan | Slicer |
|---|---|---|---|---|---|
| Hellobeeprusa — PLA starting settings defaults | PLA | 210/60 | vol 15 mm³/s | 100 | Cura/Slic3r/Repetier/Simplify 3D/Pronterface |
Tech specs
| Type | Home |
|---|---|
| Brand | BEETHEFIRST |
| Сountry | Portugal |
| Print technology | Fused Deposition Modeling (FDM / FFF) |
| Nozzle quantity | 2 |
| LCD Screen | Yes |
| Print Area | 185x200x190 |
| Bed | Heated |
| Material | PLA |
| Material diameter | 1.75 |
| Host computer software | Cura/Slic3r/Repetier/Simplify 3D/Pronterface |
| Input method | USB, Card Reader |
| Machine size | 185x200x190 |
| weight, kg | 8 kg |