3DSettings
Flyingbear Tornado is a Fused Deposition Modeling (FDM / FFF) 3D printer with a single nozzle and print speed of 150mm/s. It comes with a Heated bed, an LCD screen, and supports ABS, PLA, and CPE materials with a diameter of 1.75. It is made in China and the machine size and weight are 350x300x300mm and 20kg respectively. The host computer software for this model is Repetier-host and Cura and it can accept input from USB and Card Reader.
← Printer catalog · Slicer settings
Flyingbear Tornado slicer settings
Recommended slicer settings for the Flyingbear Tornado (Flying bear) 3D printer. Profiles cover PLA, ABS with starting nozzle/bed temperatures, fan, and speed guidance. Build volume 350x300x300. Fused Deposition Modeling (FDM / FFF). Common slicers: Repetier-host,Cura. Use these as a baseline and fine-tune for your filament brand and enclosure.
PLAABS
Flyingbear Tornado slicer settings
Starting temps and speeds for this machine. Generated defaults are a baseline — tune for your filament.
| Profile | Filament | Temp | Speed | Fan | Slicer |
|---|---|---|---|---|---|
| Flyingbear Tornado — ABS starting settings defaults | ABS | 250/100 | 150 mm/s | 0-20 | Repetier-host |
| Flyingbear Tornado — PLA starting settings defaults | PLA | 210/60 | 150 mm/s | 100 | Repetier-host |
Tech specs
| Type | Home |
|---|---|
| Brand | Flying bear |
| Сountry | China |
| Print technology | Fused Deposition Modeling (FDM / FFF) |
| Nozzle quantity | 1 |
| Print speed | 150 mm / s |
| LCD Screen | Yes |
| Print Area | 350x300x300 |
| Bed | Heated |
| Material | ABS, PLA, CPE |
| Material diameter | 1.75 |
| Host computer software | Repetier-host,Cura |
| Input method | USB, Card Reader |
| Machine size | 350x300x300 |
| weight, kg | 20 kg |