3DSettings
← Printer catalog · Slicer settings
FlyingBear P905 slicer settings
Recommended slicer settings for the FlyingBear P905 (Flying bear) 3D printer. Profiles cover PLA, ABS, ASA, NYLON, HIPS, PVA, TPU with starting nozzle/bed temperatures, fan, and speed guidance. Build volume 220х220х210/220х280х210. Fused Deposition Modeling (FDM / FFF). Common slicers: Repetier-host,Cura. Use these as a baseline and fine-tune for your filament brand and enclosure.
PLAABSASANYLONHIPSPVATPU
FlyingBear P905 slicer settings
Starting temps and speeds for this machine. Generated defaults are a baseline — tune for your filament.
| Profile | Filament | Temp | Speed | Fan | Slicer |
|---|---|---|---|---|---|
| FlyingBear P905 — ABS starting settings defaults | ABS | 250/100 | 150 mm/s | 0-20 | Repetier-host |
| FlyingBear P905 — ASA starting settings defaults | ASA | 250/100 | 150 mm/s | 0-20 | Repetier-host |
| FlyingBear P905 — HIPS starting settings defaults | HIPS | 240/100 | 150 mm/s | 20-40 | Repetier-host |
| FlyingBear P905 — NYLON starting settings defaults | NYLON | 260/90 | 150 mm/s | 0-30 | Repetier-host |
| FlyingBear P905 — PLA starting settings defaults | PLA | 210/60 | 150 mm/s | 100 | Repetier-host |
| FlyingBear P905 — PVA starting settings defaults | PVA | 210/60 | 150 mm/s | 100 | Repetier-host |
| FlyingBear P905 — TPU starting settings defaults | TPU | 230/40 | 150 mm/s | 50-80 | Repetier-host |
Tech specs
| Type | Home |
|---|---|
| Brand | Flying bear |
| Сountry | China |
| Print technology | Fused Deposition Modeling (FDM / FFF) |
| Nozzle quantity | 1 |
| Print speed | 150 mm / s |
| LCD Screen | Yes |
| Print Area | 220х220х210/220х280х210 |
| Bed | Heated |
| Material | ABS, PLA, PVA, Flexible, Hips, Nylon, ABS Plus, PS, Filaflex, Ninjaflex, Pet, ASA, Flex, Rubber |
| Material diameter | 1.75 |
| Host computer software | Repetier-host,Cura |
| Input method | USB, Card Reader |
| Machine size | 220х220х210/220х280х210 |
| weight, kg | 10 kg |